a 6 date rev revisions change b chng chck 5 4 c d 6 54 dimensions are in millimeters all dimensions for reference only phone: 973 560-0019 whippany, new jersey fax: 973 560-0076 3 drawn check appr by by by date: date: date: 2 nts scale: size: part #: a part: a 1 rev: b 3 2 c d 1 tolerance unless otherwi se specified x 1 x.x 0.4 x.xx 0.20 appr 1 of 1 sheet material and finish: insulator: polycarbonate, ul-94v-0 rated. pin contact: brass, nickel plated. solder terminals: brass, tin plated. electrical specifications: rated current: 10a rated voltage: 250vdc 5 6 4 2 3 152.9 176.5 82.1 129.3 105.7 no of port 158.5 l0.5 149.8 173.4 79.0 126.2 102.6 150.3 173.9 126.7 103.1 79.5 55.4 e0.4 f +0.2 55.9 f +0.2 recommended panel cutout 32.5 +0.2 29.5 +0.5 15.8 -0.5 16.0 +0.5 emplyoer uniquement avec 24.0 +0.5 un fusible de 250v 10a 250v~ use only with 250v fuse 10a 250v~ 10a 250v~ 10a 250v~ 23 -0.5 140.2 e0.4 l0.5 x.x 3.0 replace with corresponding panel thickness 0.80 typ. x.x 19 n 6.3 typ. l e 35 additional panel thickness & .187 [4.8] qc available on request max. panel thickness a 1.5 2.5 44r01-x131-250 44r01-x131-150 p/n 1.5 2.5 iec 60320 strip appl. inlet & outlet snap in, qc term., 5x20mm fuse holder 44r01-x131-xxx b dt 10/02/01 pb 10/3/01 pb 10/3/01 a 10/11/01 revised tol & dim f td pb r2.5 typ. 26 b 12/16/05 rev. term. lengths; add dim pb
|